Base flashing and counter flashing work as a pair, with one tucked under the shingles and the other set into the masonry and lapped over it. A leak means one of the two has failed. Call the number on this page to be connected with a local roofing contractor in Cypress.

What to look for from the yard
- Gaps between brick and metal
- Dark streaks running down the chimney
- Cracked or crumbling mortar
- Rust at the base or on the cap
Hidden damage behind old tar and trim is common, and a roofer cannot judge it until the joint is opened.
Why chimney flashing fails
Chimneys and roofs expand and contract at different rates in the Texas heat, so the joint between them moves daily. Sealant cracks, metal rusts and mortar loosens, and storms push water into the gaps. A roofer can usually tell on one visit which part of the chimney is to blame.
The median home in Cypress was built in 2007, and many chimneys there are framed chases clad in stucco or siding, where flashing is hidden and leaks show up as wall stains.
Masonry may be a separate trade
Repointing mortar, repairing a crown or rebuilding crumbling brick is often done by a mason, not a roofer. Ask who handles it and whether the quote includes it. Skipping needed masonry work shortens the life of new flashing. Small gaps matter more than they look.
Before you call in Cypress
Cypress is unincorporated, so it has no city permit office; ask the roofer and your HOA what applies to the job, and the county office (Harris County Engineering permit office) for anything else.
The Texas Department of Insurance advises reading every page before you sign, never signing with blanks, and being wary of a large down payment.
Spring is the peak for severe storms in Southeast Texas, and hail an inch across or larger can bruise shingles in ways that are hard to see from the ground.
If a tree or storm has brought down a power line near the roof, stay well away and call 911 first.
Many newer neighborhoods around Cypress have HOAs or deed restrictions; check whether roofing color or material needs approval before you order.
Contractors that take calls here usually also work in Tomball, Hockley and Pinehurst.
A typical chimney flashing repair
- Remove old sealant and loose metal.
- Check the deck beside the chimney.
- Install new base flashing under shingles.
- Cut counter flashing into mortar joints.
- Seal and replace shingles.
Weather here swings from scorching heat to sudden downpours, which is hard on masonry, metal and sealant.
Do not climb up to caulk
Tar and caulk are tempting, but a ladder on a steep roof near brick is dangerous. Caulk applied over wet or dirty metal rarely holds and can hide the true leak. Leave it to a roofer with proper gear. Do not ignore small stains.
Around Cypress
Calls come in from across Cypress, including around Norchester, Lakewood Forest, FM 529.
In HOA neighborhoods like Towne Lake, roof replacements are a typical project that goes through architectural review before work starts.
Chimney Flashing Repair questions in Cypress
What is chimney flashing?
What is a chimney cricket?
Are metal chimneys different?
Is the repair covered by insurance?
More roofing services in Cypress
Chimney Flashing Repair nearby
Helpful guides
Sources
Last updated: