Roofing referrals for Houston & nearby townsCall: (713) 489-9848
(713) 489-9848

Metal Roofing in Houston, TX

roofrepairhoustontexas.net

Standing-seam and panel roofs, what they cost and what to ask before you commit.

Thinking about a metal roof?
Call now to be connected with a local roofing contractor in Houston.
(713) 489-9848

Metal roofing in Houston usually means standing-seam or exposed-fastener panels over a solid deck. It sheds heavy rain quickly and can run cooler under a reflective finish, but it costs more up front than shingles. Call the number on this page to be connected with a local roofing contractor in Houston.

A modern house with a dark standing seam metal roof, metal roofing in Houston, TX

Metal options

Standing-seam panels have raised seams with concealed clips, so there are no fasteners exposed to the weather. Screw-down panels use visible screws with rubber washers, which cost less but need periodic attention. Steel, aluminum and copper are the common metals, and aluminum is often discussed for homes near Galveston Bay because of salt air.

Why Houston owners look at metal

Metal handles torrential downpours well, the panels are light, and many styles carry a reflective coating. The Department of Energy says cool roofs reflect more sunlight and absorb less heat than conventional dark roofing, which matters in a Houston summer. Some owners also like that falling pine cones and acorns do not embed in the surface the way they can in shingles.

Noise, dents and hail

Rain on metal is audible without good decking and attic insulation, and thin panels can dent under large hail. NWS Houston/Galveston warns that hail of one inch or larger is severe and damages rooftops. Ask a roofer about panel gauge and finish, and what your insurer says about hail damage to metal.

What it costs

A HomeAdvisor guide lists metal roofs in Texas at $6.50 to $18 per square foot overall. This Old House puts national averages for all metal types at $17 to $35 per square foot. The gap comes from metal type, panel style and roof complexity, so treat both as general ranges and compare written bids for the same scope.

Permits, coast and HOAs

The Houston Permitting Center says a re-roof on a house needs a Residential Roofing Permit with plan review and an inspection. In the TDI windstorm area, covering Brazoria and Galveston counties and parts of Harris County east of Highway 146, a re-roof needs an inspection and a WPI-8 certification. Many deed-restricted communities regulate roof material and color, so get approval first.

Questions for your roofer

  • Which panel type, metal, gauge and finish is in the bid?
  • Will the existing shingles be removed or covered?
  • How are valleys, penetrations and flashing handled?
  • Who pulls the permit and schedules any inspection?
  • Which manufacturer warranty applies to the panels and the finish?
Call now to be connected with a local roofing contractor in Houston.
(713) 489-9848

Metal Roofing questions from Houston homeowners

Is a metal roof louder in a Houston rainstorm?
It can be, depending on decking, underlayment and attic insulation. A roofer can explain how the system in your bid handles sound.
Can metal go over existing shingles?
Sometimes, but it depends on the deck, local rules and the product. Ask whether the bid includes tear-off or an overlay, and why.
Does metal roofing help with Houston heat?
A reflective finish can reduce heat absorption, according to the Department of Energy's cool roof guide. Attic insulation and ventilation still matter.
Will my HOA allow a metal roof?
That depends on your deed restrictions. Many Houston-area communities set rules for roof material and color, so ask your association before you sign.

Related roofing services in Houston

Metal Roofing in nearby cities and towns

Harris County

Fort Bend County

Brazoria County

Galveston County

Montgomery County

Call now to be connected with a local roofing contractor in Houston.
(713) 489-9848

Last updated:

☎ Call (713) 489-9848